GLAZEDDOOR:INTERZONE
Allows for simplified entry of interzone (glass interior) doors (adjacent to other zones).
Name
Type: alphanumeric
Construction Name
Type: list of objects
(
CONSTRUCTION:CFACTORUNDERGROUNDWALL,
CONSTRUCTION:FFACTORGROUNDFLOOR,
CONSTRUCTION:WINDOWDATAFILE,
CONSTRUCTION:WINDOWEQUIVALENTLAYER,
CONSTRUCTION,
CONSTRUCTION:INTERNALSOURCE or
CONSTRUCTION:AIRBOUNDARY)
To be matched with a construction in this input file
Building Surface Name
Type: list of objects
(
WALL:ADIABATIC,
ROOF,
BUILDINGSURFACE:DETAILED,
CEILING:INTERZONE,
ROOFCEILING:DETAILED,
WALL:EXTERIOR,
CEILING:ADIABATIC,
FLOOR:ADIABATIC,
WALL:UNDERGROUND,
WALL:DETAILED,
FLOOR:GROUNDCONTACT,
FLOOR:INTERZONE,
FLOOR:DETAILED or
WALL:INTERZONE)
Name of Surface (Wall, usually) the Door is on (i.e., Base Surface) Door assumes the azimuth and tilt angles of the surface it is on.
Outside Boundary Condition Object
Type: list of objects
(
GLAZEDDOOR:INTERZONE,
BUILDINGSURFACE:DETAILED,
CEILING:INTERZONE,
ROOFCEILING:DETAILED,
FENESTRATIONSURFACE:DETAILED,
DOOR:INTERZONE,
GLAZEDDOOR,
ZONE,
SURFACEPROPERTY:OTHERSIDECONDITIONSMODEL,
WINDOW:INTERZONE,
FOUNDATION:KIVA,
DOOR,
WALL:DETAILED,
SURFACEPROPERTY:OTHERSIDECOEFFICIENTS,
FLOOR:INTERZONE,
FLOOR:DETAILED,
WINDOW or
WALL:INTERZONE)
Specify a surface name in an adjacent zone for known interior doors. Specify a zone name of an adjacent zone to automatically generate the interior door in the adjacent zone. a blank field will set up a Window in an adjacent zone (same zone as adjacent to base surface)
Multiplier
Used only for Surface Type = WINDOW, GLASSDOOR or DOOR Non-integer values will be truncated to integer
Minimum: 1.0
Default: 1.0
Starting X Coordinate
Door starting coordinate is specified relative to the Base Surface origin.
Unit: m
Starting Z Coordinate
How far up the wall the Door starts. (in 2-d, this would be a Y Coordinate)
Unit: m
Length
Unit: m
Height
Unit: m