GLAZEDDOOR
Allows for simplified entry of glass Doors.
Name
Type: alphanumeric
Construction Name
Type: list of objects
(
CONSTRUCTION,
CONSTRUCTION:INTERNALSOURCE,
CONSTRUCTION:AIRBOUNDARY,
CONSTRUCTION:WINDOWEQUIVALENTLAYER,
CONSTRUCTION:FFACTORGROUNDFLOOR,
CONSTRUCTION:CFACTORUNDERGROUNDWALL or
CONSTRUCTION:WINDOWDATAFILE)
To be matched with a construction in this input file
Building Surface Name
Type: list of objects
(
WALL:ADIABATIC,
FLOOR:DETAILED,
FLOOR:GROUNDCONTACT,
WALL:DETAILED,
WALL:UNDERGROUND,
FLOOR:ADIABATIC,
FLOOR:INTERZONE,
CEILING:INTERZONE,
ROOFCEILING:DETAILED,
WALL:INTERZONE,
ROOF,
BUILDINGSURFACE:DETAILED,
CEILING:ADIABATIC or
WALL:EXTERIOR)
Name of Surface (Wall, usually) the Door is on (i.e., Base Surface) Door assumes the azimuth and tilt angles of the surface it is on.
Frame and Divider Name
Type: list of objects
( or
WINDOWPROPERTY:FRAMEANDDIVIDER)
Enter the name of a WindowProperty:FrameAndDivider object Used only for exterior windows (rectangular) and glass doors. Unused for triangular windows. If not specified (blank), window or glass door has no frame or divider and no beam solar reflection from reveal surfaces.
Multiplier
Used only for Surface Type = WINDOW, GLASSDOOR or DOOR Non-integer values will be truncated to integer
Minimum: 1.0
Default: 1.0
Starting X Coordinate
Door starting coordinate is specified relative to the Base Surface origin.
Unit: m
Starting Z Coordinate
How far up the wall the Door starts. (in 2-d, this would be a Y Coordinate)
Unit: m
Length
Unit: m
Height
Unit: m