FLOOR:INTERZONE
Allows for simplified entry of floors using adjacent zone (interzone) heat transfer - adjacent surface should be a ceiling.
Name
Type: alphanumeric
Construction Name
Type: list of objects
(
CONSTRUCTION:WINDOWEQUIVALENTLAYER,
CONSTRUCTION:INTERNALSOURCE,
CONSTRUCTION:AIRBOUNDARY,
CONSTRUCTION:FFACTORGROUNDFLOOR,
CONSTRUCTION:CFACTORUNDERGROUNDWALL,
CONSTRUCTION or
CONSTRUCTION:WINDOWDATAFILE)
To be matched with a construction in this input file
Zone Name
Type: list of objects
( or
ZONE)
Zone for the inside of the surface
Outside Boundary Condition Object
Type: list of objects
(
DOOR:INTERZONE,
GLAZEDDOOR:INTERZONE,
FLOOR:DETAILED,
CEILING:INTERZONE,
GLAZEDDOOR,
WINDOW,
WINDOW:INTERZONE,
FLOOR:INTERZONE,
ZONE,
FOUNDATION:KIVA,
SURFACEPROPERTY:OTHERSIDECONDITIONSMODEL,
WALL:INTERZONE,
DOOR,
BUILDINGSURFACE:DETAILED,
ROOFCEILING:DETAILED,
WALL:DETAILED,
FENESTRATIONSURFACE:DETAILED or
SURFACEPROPERTY:OTHERSIDECOEFFICIENTS)
Specify a surface name in an adjacent zone for known interior ceilings. Specify a zone name of an adjacent zone to automatically generate the interior ceiling in the adjacent zone.
Azimuth Angle
Unit: deg
Minimum: 0
Maximum: 360
Tilt Angle
Floors are usually tilted 180 degrees
Unit: deg
Minimum: 0
Maximum: 180
Default: 180
Starting X Coordinate
If not Flat, should be Lower Left Corner (from outside)
Unit: m
Starting Y Coordinate
Unit: m
Starting Z Coordinate
Unit: m
Length
Along X Axis
Unit: m
Width
Along Y Axis
Unit: m