CEILING:INTERZONE

Allows for simplified entry of ceilings using adjacent zone (interzone) heat transfer - adjacent surface should be a floor

Name

Type: alphanumeric

Construction Name

Type: list of objects (CONSTRUCTION:FFACTORGROUNDFLOOR, CONSTRUCTION:AIRBOUNDARY, CONSTRUCTION:WINDOWDATAFILE, CONSTRUCTION:WINDOWEQUIVALENTLAYER, CONSTRUCTION:INTERNALSOURCE, CONSTRUCTION:CFACTORUNDERGROUNDWALL or CONSTRUCTION)
To be matched with a construction in this input file

Zone Name

Type: list of objects ( or ZONE)
Zone for the inside of the surface

Outside Boundary Condition Object

Type: list of objects (SURFACEPROPERTY:OTHERSIDECONDITIONSMODEL, GLAZEDDOOR, FENESTRATIONSURFACE:DETAILED, DOOR, WINDOW:INTERZONE, DOOR:INTERZONE, FLOOR:INTERZONE, WINDOW, WALL:INTERZONE, ZONE, FOUNDATION:KIVA, FLOOR:DETAILED, ROOFCEILING:DETAILED, CEILING:INTERZONE, SURFACEPROPERTY:OTHERSIDECOEFFICIENTS, GLAZEDDOOR:INTERZONE, BUILDINGSURFACE:DETAILED or WALL:DETAILED)
Specify a surface name in an adjacent zone for known interior floors Specify a zone name of an adjacent zone to automatically generate the interior floor in the adjacent zone.

Azimuth Angle

Facing direction of outside of wall (S=180,N=0,E=90,W=270)
Unit: deg
Minimum: 0
Maximum: 360

Tilt Angle

Ceilings are usually tilted 0 degrees
Unit: deg
Minimum: 0
Maximum: 180
Default: 0

Starting X Coordinate

If not Flat, should be Lower Left Corner (from outside)
Unit: m

Starting Y Coordinate

Unit: m

Starting Z Coordinate

Unit: m

Length

Along X Axis
Unit: m

Width

Along Y Axis
Unit: m