← Back to IDD explorer (9.3.0)

EnergyPlus version: 9.3.0 | 26.1.0

FLOOR:INTERZONE

Allows for simplified entry of floors using adjacent zone (interzone) heat transfer - adjacent surface should be a ceiling.

Name
Type: alphanumeric

Construction Name
Type: list of objects (CONSTRUCTION:CFACTORUNDERGROUNDWALL, CONSTRUCTION:WINDOWEQUIVALENTLAYER, CONSTRUCTION:FFACTORGROUNDFLOOR, CONSTRUCTION:WINDOWDATAFILE, CONSTRUCTION:INTERNALSOURCE, CONSTRUCTION:AIRBOUNDARY or CONSTRUCTION)
To be matched with a construction in this input file

Zone Name
Type: list of objects ( or ZONE)
Zone for the inside of the surface

Outside Boundary Condition Object
Type: list of objects (DOOR, FLOOR:INTERZONE, ROOFCEILING:DETAILED, ZONE, SURFACEPROPERTY:OTHERSIDECOEFFICIENTS, FLOOR:DETAILED, FOUNDATION:KIVA, WALL:INTERZONE, FENESTRATIONSURFACE:DETAILED, GLAZEDDOOR:INTERZONE, SURFACEPROPERTY:OTHERSIDECONDITIONSMODEL, WINDOW, DOOR:INTERZONE, CEILING:INTERZONE, GLAZEDDOOR, BUILDINGSURFACE:DETAILED, WINDOW:INTERZONE or WALL:DETAILED)
Specify a surface name in an adjacent zone for known interior ceilings. Specify a zone name of an adjacent zone to automatically generate the interior ceiling in the adjacent zone.

Azimuth Angle
Unit: deg
Minimum: 0
Maximum: 360

Tilt Angle
Floors are usually tilted 180 degrees
Unit: deg
Minimum: 0
Maximum: 180
Default: 180

Starting X Coordinate
If not Flat, should be Lower Left Corner (from outside)
Unit: m

Starting Y Coordinate
Unit: m

Starting Z Coordinate
Unit: m

Length
Along X Axis
Unit: m

Width
Along Y Axis
Unit: m